Derale-performance 4" Tornado Electric Puller Fan, Premium Mount Bedienungsanleitung PDF herunterladen

KIT CONTENTS

QTY. DESCRIPTION

1 Electric Fan Assembly

4 Mounting Rod

4 Mounting Clip

4 1x1 Foam Pad

1 Manual Switch

7ft 14 Gauge Wire

1 20 Amp Fuse Holder

QTY. DESCRIPTION

3 Blue Female Connector

2 #10 Blue Ring Terminal

3 Blue Butt Connector

4 #10 x 1/2” Sheet Metal Screws

4 4” Zip Ties

Blue Wire Tap Connector

Please read these instructions completely before beginning installation

TOOLS NEEDED

Standard Screw Driver

Drill

5/32” Drill Bit

12V Test Light

Wire Stripper

Crimping Tool

Dyke Pliers

Puller Fan

Pusher Fan

Air Flow

Engine Radiator

16504-16505-InstructionSheet.cdr

INSTALLATION INSTRUCTIONS

TORNADO ELECTRIC FAN KIT

PART # 16504 & 16505

IMPORTANT

This fan assembly is designed for PULLER applications only.

(See Diagram #1)

(Continues on Page 2)

Derale Performance, Los Angeles, CA 800.421.6288 www.derale.com

ELECTRIC FAN MOUNTING

Note:

Caution:

This Electric Fan Assembly requires 4 mounting positions (Part# 16505 requires 3 mounting positions). (See Diagram #2)

1. Position the electric fan against the radiator in the desired location.

2. Take the Plastic Rods provided and install through the mounting holes on the shroud pushing them slowly into and through

the radiator core.

Do not use excessive force when pushing Plastic Rods through radiator core. Excessive force could cause

damage to the radiator fins and/or core. Plastic Rods

should not be inserted thru both the radiator and the

condenser cores.

3. Takethe1x1Foam pads provided and install them

onto the Plastic Rods now protruding through the

radiator core.

4. Take the Plastic Clips provided, making sure they are in

the correct direction (Derale writing out) install onto the

Plastic Rods and cinch them until the1x1Foam Pads

are compressed.

5. Cut off the excess Plastic Rod.

Diagram #2

Mounting Clips

1x1

Foam

Pads

Mounting

Rods

Diagram #1

1 2

Inhaltsverzeichnis

Seite 1 - PART # 16504 & 16505

KIT CONTENTSQTY. DESCRIPTION1 Electric Fan Assembly4 Mounting Rod4 Mounting Clip4 1x1 Foam Pad1 Manual Switch7ft 14 Gauge Wire1 20 Amp Fuse HolderQTY.

Seite 2 - Diagram #4

MANUAL SWITCH MOUNTING(See Diagram #3)1. Find a location in the vehicles passenger compartment.2. Using the Manual Switch as a template, mark and dril

Kommentare zu diesen Handbüchern

Keine Kommentare

Derale-performance 4" Tornado Electric Puller Fan, Premium Mount Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Fans Derale-performance 4" Tornado Electric Puller Fan, Premium Mount herunter. Derale Performance 4" Tornado Electric Puller Fan, Premium Mounting Kit User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fans Derale-performance 4" Tornado Electric Puller Fan, Premium Mount