Derale-performance 19 Row Series 8000 Plate & Fin Transmission Co Bedienungsanleitung PDF herunterladen

KIT CONTENTS

QTY. DESCRIPTION

1 Transmission Cooler

1 11/32” X 4’ Hose

4 Hose Clamps

1 Insta-dapt Adapter

Please read these instructions completely before starting the installation.

13611-13614-InstructionSheet

TOOLS NEEDED

Standard Screw Driver

or 5/16” Nut Driver

Dyke Pliers

Razor Knife

QTY. DESCRIPTION

4 Mounting Rods

4 Mounting Clips

4 Foam Pads

1x1

INSTALLATION INSTRUCTIONS

TRANSMISSION COOLER

PART # 13501-13504

(Continues on Page 2)

The Transmission Cooler can be mounted in multiple locations on your

vehicle. Reference Diagram # 2 for possible cooler positions. #1 is the

ideal location, #2 is second best and #4 being the last choice.

The Cooler core will flow in either direction, there is no specified inlet

or outlet port.

Note:

Diagram #2

COOLER INSTALLATION

(See Diagram #3)

1. Identify the 4 Mounting Rods, 4 Mounting Clips and

4 1x1 Foam Pads.

2. One by one, Install the 4 Mounting Rods thru the Transmission

Cooler.

3. Take the 1x1 Foam Pads supplied, peel off the paper lining & slide

them onto the Mounting Rods, sticking them against the

Transmission Cooler.

4. Take the Cooler Assembly with attached looped hose and hold in

the desired location.

5. Install the 4 Mounting Rods thru the Radiator/Condenser core.

Do not use excessive force when pushing the Mounting

Rods through the Radiator/Condenser. Excessive force could

cause damage to the fins and possibly puncture a tube.

6. Take the Mounting Clips supplied, making sure they are in the

correct direction (Derale writing out) install onto the Mounting Rods

and cinch them until the 1x1 Foam Pads are slightly compressed.

7. Cut off any excess Mounting Rods.

Mounting

Warning:

COOLER LOCATION

When selecting the best location for your vehicle, always consider a

location that will deliver the maximum airflow. (See Diagram #2)

PRE-INSTALLATION

4 ecure in place using the Hose Clamps.

1. Identify the 11/32” X 4’ Hose and Hose Clamps.

2. Slide one hose clamp on each end of the supplied Hose.

3. Using a dab of oil, lubricate each end of the hose and install hose onto

the cooler inlets forming a loop.

This kit includes an Insta-dapt Adapter fitting for adapting the cooler

line to the radiator. (See Diagram #1)

The Insta-dapt fitting has a 1/2”-20 Male/Female thread and fits most

vehicles with 5/16” transmission cooler lines.

For vehicles that are not compatible with the Insta-dapt Adapter, please

reference Radiator Adapter Fitting Guide included.

IMPORTANT

Insta-dapt Adapter

Diagram #1

Diagram #3

Open End Wrenches

Mounting

Rods

Foam Pads

Mounting

Clips

4’ Hose

Derale Performance, Los Angeles, CA 800.421.6288 www.derale.com

1 2 3

Inhaltsverzeichnis

Seite 1 - PART # 13501-13504

KIT CONTENTSQTY. DESCRIPTION1 Transmission Cooler1 11/32” X 4’ Hose4 Hose Clamps1 Insta-dapt AdapterPlease read these instructions completely before s

Seite 2 - Diagram #4

Warning: Installation of accessories should only be undertaken by those with mechanical knowledge and are familiar with working onvehicles. Always use

Seite 3

RADIATOR ADAPTER FITTING GUIDE

Kommentare zu diesen Handbüchern

Keine Kommentare

Derale-performance 19 Row Series 8000 Plate & Fin Transmission Co Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Wasserkocher Derale-performance 19 Row Series 8000 Plate & Fin Transmission Co herunter. Derale Performance 19 Row Series 8000 Plate & Fin Transmission Cooler Kit User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wasserkocher Derale-performance 19 Row Series 8000 Plate & Fin Transmission Co