Derale-performance 6 Pass Series 7000 Aluminum_Copper GM V8 Engine Oi Bedienungsanleitung PDF herunterladen

15503-InstructionSheet

Derale Performance, Los Angeles, CA 800.421.6288 www.derale.com

INSTALLATION INSTRUCTIONS

ENGINE OIL COOLER KIT

PART # 15503

KIT CONTENTS

QTY. DESCRIPTION

1 Oil Cooler

1 Sandwich Adapter

1 3 1/8” O-ring

2 1/2” NPT x 1/2” Barb Fittings

10ft 1/2” OEM Spec Hose

5 6” Zip Ties

QTY. DESCRIPTION

4 Hose Clamps

1 13/16-16 Sleeve Nut

4 Mounting Rods

4 Foam Pads

4 Mounting Clips

(Page 1)

The Oil Cooler can be mounted in multiple locations on your vehicle. Reference Diagram # 1

for possible cooler positions. #1 is the ideal location, #2 is second best and #4 being the last

choice.

The Cooler core will flow in either direction, there is no specified inlet or outlet port.Note:

Diagram #1

TOOLS NEEDED

Standard Screw Driver or

5/16” Nut Driver

Dyke Pliers

Torque Wrench

COOLER MOUNTING

(See Diagram #2)

1. Identify the 4 Mounting Rods, 4 Mounting Clips and 4 1x1 Foam Pads.

2. One by one, Install the 4 Mounting Rods thru the Oil Cooler.

3. Take the 1x1 Foam Pads supplied, peel off the paper lining and slide

them onto the Mounting Rods, sticking them against the Oil Cooler.

4. Take the Cooler Assembly with attached looped hose and hold in the

desired location.

5. Install the 4 Mounting Rods thru the Radiator/Condenser core.

Do not use excessive force when pushing the Mounting Rods

through the Radiator/Condenser. Excessive force could cause damage to

the fins and possibly puncture a tube.

6. Take the Mounting Clips supplied, making sure they are in the correct

direction (Derale writing out) install onto the Mounting Rods and cinch

them until the 1x1 Foam Pads are slightly compressed.

7. Cut off any excess Mounting Rods.

Warning:

11/16” Open End Wrench

Oil Filter Wrench

1 1/8” Socket

Teflon Tape

Please read these instructions completely before starting the installation.

COOLER LOCATION

When selecting the best location for your vehicle, always consider a location that will

deliver the maximum airflow.

PRE-INSTALLATION

3 ecure in place using the Hose Clamps. (See Diagram #2)

1. Slide one hose clamp on each end of the supplied Hose.

2. Using a dab of oil lubricate each end of the hose and install hose onto the 1/2” inlets on the Oil

Cooler forming a loop.

IMPORTANT

In most cases the Factory Oil Filter will work with the supplied sandwich adapter. In some applications where the frame or

exhaust system interferes with the new filter depth we recommend using a shorter filter length.

See chart below for possible filter options.

Diagram #2

Mounting

Rods

Foam Pads

Mounting

Clips

This kit is designed to fit GM vehicles Manufactured

between 1963-2007 with engine block oil filter landings

of 3 1/2”, primarily SB & BB V8’s. For vehicles with

2 1/2” and 2 3/4” oil filter landings, please visit

www.derale.com for alternative Sandwich Adapter Kits.

SLEEVE NUT

Diagram #3

FRAM WIX FRAM WIX

THREAD FILTER FRAM FILTER WIX FILTER FRAM FILTER WIX

SIZE HEIGHT P/N HEIGHT P/N HEIGHT P/N HEIGHT P/N

5.25 PH13 5.17 51060 4.06 PH30 4.33 5106913/16-16

IMPORTANT

1 2

Inhaltsverzeichnis

Seite 1 - PART # 15503

15503-InstructionSheetDerale Performance, Los Angeles, CA 800.421.6288 www.derale.comINSTALLATION INSTRUCTIONSENGINE OIL COOLER KITPART # 15503KIT CON

Seite 2 - Diagram #4

Warning: Installation of accessories should only be undertaken by those with mechanical knowledge and are familiar with working onvehicles. Always use

Kommentare zu diesen Handbüchern

Keine Kommentare

Derale-performance 6 Pass Series 7000 Aluminum_Copper GM V8 Engine Oi Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Wasserkocher Derale-performance 6 Pass Series 7000 Aluminum_Copper GM V8 Engine Oi herunter. Derale Performance 6 Pass Series 7000 Aluminum_Copper GM V8 Engine Oil Cooler Kit, Sandwich Adapter User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wasserkocher Derale-performance 6 Pass Series 7000 Aluminum_Copper GM V8 Engine Oi