Derale-performance 16 Pass Electra-Cool Remote Transmission Cooler Ki Bedienungsanleitung PDF herunterladen

15900-InstructionSheet

Derale Performance, Los Angeles, CA 800.421.6288 www.derale.com

INSTALLATION INSTRUCTIONS

ELECTRA-COOL TRANSMISSION COOLER KIT

PART # 15900

KIT CONTENTS

QTY. DESCRIPTION

1 Oil Cooler Assembly

1 -8AN Male x 1/2” Barb Fitting

3 -8AN Female x 1/2” Barb Fitting

10ft 1/2” OEM Spec Hose

2 1/2” Compression Fitting

2 1/2” NPT Female x

1/2” Barb Fitting

1 Thermostat Switch

1 In-line Thermostat Fitting

QTY. DESCRIPTION

4 Hose Clamp

4 1/4”-20 x 1” Hex Bolt

8 1/4” Washer

4 1/4”-20 Lock Nut

4 6” Zip Ties

1 #10 Blue Ring Terminal

2 Blue Female Connector

1 Blue Wire Tap Connector

COOLER LOCATION

COOLER INSTALLATION

The purpose of a remote mount cooler is to be able to mount the

cooler away from the front of the vehicle therefore not blocking

airflow to the radiator/condenser.

This cooler can be mounted anywhere space permits. Always

keep in mind that the cooler still needs access to airflow to

perform at its peak.

1. Hold the Oil Cooler Assembly in the desired location.

2. Using a marker, mark the four hole locations.

3. Using a drill and 9/32” drill bit, drill the four mounting

holes.

4. Identify the 1/4”-20 x 1” Bolts, 1/4” Washers & 1/4” Lock

Nuts supplied and attach the Oil Cooler Assembly.

(Continues on Page 2)

Please read these instructions completely before starting the installation.

Always use backup wrenches when tightening fittings.

The AN fittings supplied in this kit do not require any

thread sealant. (See Diagram #1)

IMPORTANT

IN-LINE THERMOSTAT INSTALLATION

Mounting Location

There are two options for installing the In-Line Thermostat.

1. Cooler inlet installation

2. Hose installation

The recommended location for the In-line Thermostat Fitting is on the INLET side

of the oil cooler, so the oil line that provides the cooler fluid from the transmission.

Always use two wrenches when tightening the In-line Thermostat Fitting to

the oil cooler; failure to use a back up wrench could cause damage to the cooler core.

The In-line Thermostat Fitting is provided with a -8AN male and female threads.

a) Attach the In-line Thermostat Fitting onto the INLET fitting on the oil cooler.

b) Using Loctite or suitable sealant, carefully HAND TIGHTEN the

Thermostat Switch clockwise onto the In-line Thermostat .

Do not use a wrench or damage to the Thermostat Switch could occur.

The kit provides two brass fittings that are only used with this option. They are

designed to adapt the AN fittings to hose barbs.

a) Using the -8AN Male x 1/2” Barb Fitting provided, attach the fitting

to the female side of the In-line Thermostat Fitting.

b) Using the -8AN Female x 1/2” Hose Barb Fitting provided, attach the

fitting to the inlet on the cooler.

c) Using the OEM Spec Hose and Hose Clamps provided, cut the hose to

the desired length and attach one end of the hose to the oil cooler inlet

and the other to the In-line Thermostat.

Warning:

(See Diagram #2)

(See Diagram #3)

ONLY

Fitting

d) Using Loctite or suitable sealant, carefully HAND TIGHTEN ONLY the Thermostat Switch clockwise onto the In-line

Thermostat Fitting.

Do not use a wrench or damage to the Thermostat Switch could occur.Warning:

Standard Screw Driver

or 5/16” Nut Driver

15/16” Open End Wrench

13/16” Open End Wrench

3/4” Open End Wrench

7/8” Open End Wrench

7/16” Socket & Ratchet

Teflon Tape

Dyke Pliers

Razor Knife

Marker

Tubing Cutter

TOOLS NEEDED

Diagram #1Diagram #1

Inlet

Diagram #2Diagram #2

In-Line

Thermostat

Fitting

Diagram #3Diagram #3

In-Line

Thermostat

Fitting

Thermostat Switch

Hose

Hose Clamps

Thermostat

Switch

Backup

Wrench

WARNING:

DO NOT TIGHTEN WITHOUT

BACKUP WRENCH!

1 2

Inhaltsverzeichnis

Seite 1 - PART # 15900

15900-InstructionSheetDerale Performance, Los Angeles, CA 800.421.6288 www.derale.comINSTALLATION INSTRUCTIONSELECTRA-COOL TRANSMISSION COOLER KITP

Seite 2 - Diagram #5Diagram #5

Warning: Installation of accessories should only be undertaken by those with mechanical knowledge and are familiar with working onvehicles. Always use

Weitere Dokumente für Wasserkocher Derale-performance 16 Pass Electra-Cool Remote Transmission Cooler Ki

Um das Dokument anzuzeigen Derale-performance 16 Pass Electra-Cool Remote Transmission Cooler Ki Bedienungsanleitung

Derale-performance 16 Pass Electra-Cool Remote Transmission Cooler Ki Bedienungsanleitung (2 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Derale-performance 16 Pass Electra-Cool Remote Transmission Cooler Ki Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Wasserkocher Derale-performance 16 Pass Electra-Cool Remote Transmission Cooler Ki herunter. Derale Performance 16 Pass Electra-Cool Remote Transmission Cooler Kit, -8AN Inlets User Manual Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Wasserkocher Derale-performance 16 Pass Electra-Cool Remote Transmission Cooler Ki

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wasserkocher Derale-performance 16 Pass Electra-Cool Remote Transmission Cooler Ki